HP TX1000 User Manual
Page 50
Remove the WLAN module:
1
.
Position the computer with the front toward you.
2
.
Loosen the Phillips PM2.0×4.0 screw (1) that secures the WLAN module compartment cover to the
computer.
3
.
Lift the right side of the WLAN module compartment cover (2) and swing it to the left.
4
.
Remove the WLAN module compartment cover.
NOTE:
The WLAN module compartment cover is included in the Plastics Kit, spare part
number 441138-001.
5
.
Disconnect the WLAN antenna cables (1) from the WLAN module.
NOTE:
The black WLAN antenna cable is connected to the WLAN module “Main” terminal.
The white WLAN antenna cable is connected to the WLAN module “Aux” terminal.
6
.
Remove the two Phillips PM2.0×4.0 screws (2) that secure the WLAN module to the computer. (The
edge of the module opposite the socket rises away from the computer.)
ENWW
Component replacement procedures 45