HP TX1000 User Manual
Page 63
25
.
If it is necessary to replace the Web camera, disconnect the camera cable (1) from the camera
module.
26
.
Remove the camera module (2) from the display enclosure.
NOTE:
The Web camera is available using spare part number 441120-001.
27
.
If it is necessary to replace the display LED board, remove the two Phillips PM2.0×4.0 screws (1)
that secure the display LED board to the to the display enclosure.
28
.
Release the display LED board (2) as far as the display LED board cable will allow.
29
.
Disconnect the display LED board cable (3) from the display LED board.
NOTE:
The display LED board is available using spare part number 441123-001.
30
.
Remove the display LED board from the display enclosure.
31
.
If it is necessary to replace the display QuickPlay board, remove the two Phillips PM2.0×4.0 screws
(1) that secure the display QuickPlay board to the display enclosure.
58 Chapter 5 Removal and replacement procedures
ENWW