HP TX1000 - Manual (Page 59)

7 . Disconnect the display assembly cables (2) and (3) from the system board.
8 . Turn the computer display-side up, with the front toward you.
9 . Open the computer.
10 . Remove the display convertible hinge cover (1).
11 . Remove the two Phillips PM2.5×6.0 screws (2) that secure the display assembly to the computer.
12 . Disconnect the display panel cable (3) from the system board.
NOTE: As you remove the display assembly, be sure that the display cables and wireless
antenna cables move cleanly through the opening (1) in the computer.
54 Chapter 5 Removal and replacement procedures ENWW