HP 3Com Etherlink III 3C590 User Manual
Page 25
10 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Microsoft Windows NT 3.51 Workstation
10 Installing the 3COM Etherlink III 3C590 PCI 10BT
Network Adapter
Microsoft Windows NT
3.51 Workstation
Connecting to a
Windows NT 4.0 Server
Requirements
•
HP Vectra with Windows NT 3.51 Workstation.
•
3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver-
sion 5.2.2.
•
Driver File: EL59X.SYS, version 1.22
•
Microsoft Windows NT 3.51 Workstation media.
•
Microsoft Windows NT 3.51 Service Pack 5 media.
•
Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink
IPX/SPX Compatible Transport and NWLink NetBIOS network protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the 3COM 3C590 network adapter
into a PCI slot.
2 Connect network cable media to the 3COM 3C590 network adapter.
3 Log into Windows NT with administrator privileges.
4 Open the “Network” icon in the “Control Panel” program group.
5 Click on “YES” in the “Network Settings” dialog box to install Windows NT
Networking.
6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive.
7 Set the path to “D:\I386” (D:\ represents the CD-ROM drive with the
Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window
and click on “Continue”.
Device Configuration
Vectra Vli8
Vectra VEi7
Vectra VEi8
Interrupt
10
05
05
I/O Address
300
300
300