HP 3Com Etherlink III 3C590 - Manual (Page 32)

13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Connecting to a Novell NetWare 4.11 Server
9 Accept the default network board settings and press “F10” to save it.
10 Select option 6 “Highlight here and press <Enter> to install” and press
“Enter” to begin installation.
11 When the installation is finished, remove the 3COM 3C590 driver disk
from the floppy drive and press <CTR><ALT><DEL> to restart the
system.
12 You may login to a server from the DOS prompt or load Windows for
Workgroup v3.11 and use the “NetWare User Tools” from the NetWare
Tools folder to login to a server. (If you do not have the required
information, contact your network administrator).