HP 3Com Etherlink III 3C590 - Manual (Page 6)

1 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Connecting to a Windows NT 3.51 Server
7 During the Update Device Driver process, point to the appropriate file
locations (i.e. drivers disk or Windows 95 CD) to install the necessary
files. Keep newer files when a file being copied is older than the file
currently on your computer.
8 Click on “OK” when the system prompts for the computer and workgroup
names.
9 Enter the Computer Name, Workgroup, and Computer Description in the
appropriate spaces and click on “Close” (Contact your network
administrator if you do not have the required information).
10 Click on “YES” to restart the system when prompted.
11 Right-click on the “Network Neighborhood” icon and select “Properties”.
12 Accept the default Network Protocols and the Primary Network Logon
(Client for Microsoft Networks) as seen below and click on “OK”. (If you
do not have the required information, contact your network
administrator)
13 Client for Microsoft Networks
Client for Microsoft Networks
3Com EtherLink III
3Com TCAATDI Diagnostic TDI
IPX/SPX-compatible Protocol
NetBEUI
14 Click on “OK” to accept the configuration.
15 When prompted, specify the path to your Windows 95 files.
16 Click on “Yes” when prompted to restart the system.