Hearth and Home Technologies BIR42-B - Manual (Page 35)

35 Heatilator • Birmingham BIR42-B • 4059-681C• 9/12
Chimney
Pipe
Chase Top
Termination Cap
Chase
Collar
2 in. (51 mm)
Minimum Height
Remove 2 screws
from front & back
to lift the top off
Termination cap pipe and chimney section must overlap
1-1/2 in. (38 mm)
Place waterproof sealer
under each flange of the
termination cap and on
top of each screw to
help prevent leaks.
The last section of pipe
must stop between 2 in.
(51 mm) above top of
chase and 7 in. (178 mm)
below top of chase
2 in. (51 mm)
7 in. (178 mm)
• TCT1175 Terra Cotta Cap
Figure 9.7 Installing a TCT1175 Terra Cotta Cap 