HP 7000N - Manual (Page 23)

Table 2-2 Jetdirect menus (continued)
Menu item Sub-menu item Sub-menu item Values and Description
Manual Use this item to manually set IPv6 addresses on the
server.
Enable : Select this item and choose the On setting to
enable manual configuration, or the Off setting to
disable manual configuration.
Address : Use this item to type a 32 hexadecimal digit
IPv6 node address that uses the colon hexadecimal
syntax.
Proxy Server Specifies the proxy server to be used by embedded
applications in the product. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet
security, for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you may need to contact your
Independent Service Provider (ISP) for the proxy
server address.
Proxy Port Type the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can
be a value from 0 to 65535.
Idle Timeout Idle Timeout : The time period, in seconds, after which
an idle TCP data connection is closed (default is 270
seconds, 0 disables the timeout).
IPX/SPX Enable Not applicable for HP Scanjet Enterprise 7000n
AppleTalk Enable Not applicable for HP Scanjet Enterprise 7000n
DLC/LLC Enable Not applicable for HP Scanjet Enterprise 7000n
Security Secure Web For configuration management, specify whether the
Embedded Web Server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS Required : For secure, encrypted
communications, only HTTPS access is accepted.
The Jetdirect server will appear as a secure site.
HTTPS Optional (default): Access using either HTTP
or HTTPS is permitted.
IPSec Specify the IPSec status on the Jetdirect server.
Keep : IPSec or firewall status remains the same as
currently configured.
Disable : IPSec or firewall operation on the Jetdirect
server is disabled.
Navigate the Administration menu 15