HP 7000N - Manual (Page 74)

5. Reinsert the roller into the housing.
6. Open the door on the inside of the product, open the roller covers, and then remove the rollers.
7. Remove any visible lint or dust from the rollers and their housing using either compressed air or
a clean lint-free cloth moistened with isopropyl alcohol.
8. Reinsert the rollers into the housing. Rotate the rollers as you slide them to the left to match up
the notches on the roller axle and axle holder. Close the roller cover door and then close the
door on the inside of the product.
66 Chapter 7 Manage and maintain the product