Configure other digital sending settings – HP 7000N User Manual

Page 36

Advertising
background image

Configure other digital sending settings

Use the Embedded Web Server (EWS) to configure e-mail settings and additional features such as:

E-mail

Digital fax

Save to network folder

Save to USB

Quick sets

Address books

Authentication for Windows, LDAP, and local access
codes

When the product is connected to the network, the EWS is automatically available.

To start the EWS, open a web browser on a computer and type the IP address of the product. To find
the IP address or host name, touch the

Network Address

button on the Home screen.

In addition to the features listed in this section, you can also set up workflows using third-party
software or HP Digital Sending Software that is compatible with the product. For information about
setting up these workflows and using them, see the documentation that came with these products.

Configure digital fax settings

1.

Click the Fax tab.

2.

On the left navigation menu, select the Fax Send Setup entry.

3.

Select Enable Fax Send and then select either the LAN Fax Service or Internet Fax Service
entry (depending on your network configuration).

4.

Follow the onscreen instructions to complete the required fields, and then click the Apply button.

5.

To add fax numbers to the

Speed Dial List

, click the Speed Dials entry in the left navigation

pane, click a speed dial code, click the Edit button, enter a speed dial name and fax number,
click the Add button, verify that the displayed information is correct, and then click the OK
button.

Save to Network Folder Setup

Before configuring network folders, set up shared folders following the instructions for your network
operating system.

1.

Click the Scan/Digital Send tab.

2.

On the left navigation menu, click the Save to Network Folder Setup entry.

3.

Select the Enable Save to Network Folder checkbox.

4.

Set the default settings you want for all folders and then click the Apply button.

5.

To specify network folders to which to save documents, click the Add button in the Quick Sets
area and follow the onscreen instructions.

Configure USB storage device settings

1.

Click the Scan/Digital Send tab.

2.

On the left navigation menu, click the Save to USB Setup entry.

28

Chapter 4 Configure the product

Advertising
This manual is related to the following products: