HP 7000N - Manual (Page 82)

7. Slide the new drive into the drive housing until it snaps into place, ensuring that the pegs on the
side of the drive rails fit into the slot on the drive housing.
8. Attach the flat cable and the cable bundle to the new drive.
9. Secure the cables with the cable ties you previously unfastened.
10. Slide the back panel drawer into place (taking care that no cables are pinched) and secure with
the screws you previously loosened.
11. Reconnect the power and Ethernet cables, press the Power switch on the back of the product to
the on position, and then press the Power button to turn on the product.
74 Chapter 7 Manage and maintain the product