HP 7000N User Manual
Page 32
Advertising
Manually configure IPv6 TCP/IP parameters from the control panel
In addition to using the Embedded Web Server, you can also use the control-panel menus to set an
IPv6 address.
1.
At the product control panel, touch the
Administration
button.
2.
Touch the
Network Settings
menu to open it.
3.
Touch the
Jetdirect Menu
option.
4.
Touch the
TCP/IP
option.
5.
Touch the
IPV6 Settings
option.
6.
Touch the
Address
option.
7.
Touch the
Manual Settings
option.
8.
Touch the
Enable
option.
9.
Touch the
On
option, and then touch the
Save
button.
10.
Touch the
Address
option, and then touch the data entry field.
11.
Use the keyboard to enter the address, and then touch the
Save
button.
24
Chapter 4 Configure the product
Advertising
This manual is related to the following products: