HP 7000N - Manual (Page 43)

Load documents
1. Pull up the document feeder extension and adjust the output tray. Ensure that the output tray
does not extend beyond the surface on which the scanner sits.
2. Adjust the paper guides to the width of the documents. Take care not to overtighten the guides,
which can restrict paper feeding.
When scanning small originals such as checks, it is especially important that the paper guides fit
snugly against the edges of the original.
3. Fan the stack of document pages to ensure that the pages do not stick together. Fan the edge
that will be pointing into the feeder in one direction, and then fan that same edge in the opposite
direction.
Load documents 35