HP 377707-002 - Manual (Page 11)

3
Table 1-2 lists and describes the icons in the Tree frame.
Tree Frame Branches
1. Click the plus-sign ( ) to expand an icon and display the branches that you can configure.
2. Click a branch icon ( ) to open the configuration options for that branch in the View frame.
Table 1-3 lists and describes the configurable branches under the Chassis icon.
Table 1-2: Tree Frame Icons
Icon Description
Chassis ( )
The Chassis icon lets you view and configure hardware in your switch. Access
this icon to view the status of all field replaceable units (FRUs) on your device.
Maintenance ( ) The Maintenance icon contains branches that let you perform basic
administrative tasks on your switch. Access this icon to configure NTP servers,
assign a boot-config file, view the contents of the file system, etc.
InfiniBand ( )
The InfiniBand® icon provides subnet manager (SM) and I/O details. You can
click the Subnet Manager branch of this icon to configure basic SM properties.
Ethernet ( )
(select hardware
platforms only)
The Ethernet icon lets you view and configure many aspects of IP traffic on
your switch.
Fibre Channel
(
) (select
hardware platforms
only)
The Fibre Channel icon shows you SRP host and Fibre Channel (FC) storage
details and lets you configure global policies.
Help ( ) The Help icon takes you to on-line help and support resources.
Table 1-3: Chassis Icon Branches
Branch Description
Cards Click this branch to display and configure controller, switch, and gateway cards.
Ports Click this branch to display and configure all external IB, Ethernet, and FC ports
on your device.
Power Supplies
(select hardware
platforms only) Click this branch to view the status of the power supplies on your device.
Fans (select
hardware platforms
only) Click this branch to view the status of the fans on your device.
Sensors Click this branch to view the status and readings on the temperature sensors on
your device.
Backplane (select
hardware platforms
only) Click this branch to view backplane details.
Management Ports Expand the Management Ports icon to display the following branches:
• Serial—displays the Serial Console port configuration.
• Ethernet—displays the Ethernet Management port configuration.
• InfiniBand—displays the InfiniBand Management port configuration.