Launching chassis manager, Launching chassis manager without ssl, Launching chassis manager with ssl – HP 377707-002 User Manual
Page 19: Launch chassis manager, Requirements, proceed to
11
b. (Optional) Enter the ip http secure-server command to enable HTTPS services on your
device to permit SSL-secured access to your Server Switch.
Example
Launching Chassis Manager
CM without SSL requires no additional setup. CM with SSL requires additional steps based on
yourWeb browser.
Launching Chassis Manager without SSL
To launch CM:
1. Launch your Web browser.
2. Type the IP address of your Server Switch in the address field of your browser and press Enter.
(You configured the IP address in
of
“Preparing Your Device” on page 9
A login window opens.
Figure 2-1: CM Login Window
3. Enter your Server Switch user name and password in the login window and click the OK button.
CM loads in your browser window.
Launching Chassis Manager with SSL
SSL setups vary by browser types. The following sections explain how to launch CM with particular
browsers.
Topspin-360(config)# ip http secure-server