HP 377707-002 - Manual (Page 79)

71
Viewing SRP Host (Initiator) Properties
To view the properties of a SRP host:
1. Expand the Fibre Channel icon in the Tree frame.
2. Click the SRP Hosts branch. A SRP Hosts table that includes all SRP hosts that connect to the
chassis appears in the View frame.
3. Click the radio button next to the SRP host whose properties you want to view, then click the
Properties button. The SRP Host Properties window opens. Table 7-2 lists and describes the
elements of this window.
Viewing SRP Host (Initiator) Worldwide Port
Names
To view the (WWPNs of the virtual ports through which FC nodes communicate with SRP hosts:
1. Expand the Fibre Channel icon in the Tree frame.
2. Click the SRP Hosts branch. A SRP Hosts table that includes all SRP hosts that connect to the
chassis appears in the View frame.
3. Click the radio button next to the SRP host whose WWPNs you want to view.
Table 7-2: SRP Host Properties Window Elements
Element Description
SRP Initiator ID field Host GUID and GUID extension.
Ports Registered With field Port(s) on your Server Switch that connect to the host.
WWNN field WWNN of the SRP host.
Description field User-assigned text description of the SRP host.
PKeys field Partition key(s) of the SRP host.
Boot Target field WWPN of the target that contains the image that the SRP host
uses to boot.
Boot LUN field LUN ID of the LUN that contains the image that the SRP host
uses to boot.
Action field Provides a pulldown menu of actions that you can perform on
the host. Select an action, then click the Apply button to
perform the action.
Result field Displays the result of the action that you performed with the
pulldown menu from the Action field.
Apply button Applies the changes that you make in the window to the host.
Reset button Resets the fields in the window to match the properties of the
host.
Close button Closes the window. If you close the window before you apply
changes, CM makes no changes to the host.
Help button Opens on-line help.