Document Outline

• POD UG230 Series <Hardware> Cover (FEH381)
  • Preface
  • Notes on Safe Use of POD
  • Chapter 1 Overview
  • Chapter 2 Specifications
  • Chapter 3 Installation
  • Chapter 4 Instructions
  • Chapter 5 Connections
  • Chapter 6 POD Operations
  • Chapter 7 Error Correction
  • Chapter 8 Inspection and Maintenance
• Overview
  • 1. Features
  • 2. Models and Peripheral Equipment
    • POD Models
    • Peripheral Equipment
  • 3. System Composition
    • System Composition of UG230
    • System Composition of UG230 + UG230A-DCL
• Specifications
  • 1. Specifications
    • General Specifications
    • Display Specifications
    • Touch Switch Specifications
    • Function Switch Specifications
    • Interface Specifications
    • Clock and Backup Memory Specifications
    • Drawing Environment
    • Display Function Specifications
    • Function Performance Specifications
  • 2. Dimensions and Panel Cut-out
    • UG230 External View and Dimensions
    • UG230 + UG230A-DCL External View and Dimensions
  • 3. Names and Functions of Components
  • 4. Modular Jack (MJ1/MJ2)
    • Modular Jack 1 (MJ1)
    • Modular Jack 2 (MJ2: Exclusive to the UG230)
    • Notes on Wiring
    • Transferring Screen Data
    • Barcode Reader Connection
    • Printer Connection (Serial Printer)
  • 5. USB Connectors
    • USB-A (Master Port)
    • USB-B (Slave Port)
  • 6. D-sub 25-Pin Connector (CN1) (Optional)
    • Serial Connector (CN1)
  • 7. 10BASE-T (LAN) (Optional)
    • 10BASE-T Connector
    • Notes on Wiring
  • 8. CF Card
    • Recommended CF Cards
    • CF Card Insertion Position
    • Mounting and Dismounting the CF Card
    • Notes on Handling the CF Card
• Installation
  • 1. Mounting Procedure
    • Mounting Procedure
    • Mounting Angle
  • 2. Power Supply Cable Connection
    • Power Supply Cable Connection
    • Grounding
• Instructions
  • 1. Coin-type Lithium Battery
    • Battery Mounting Procedure
    • Battery Replacement
  • 2. DIP Switch Setting
    • DIP Switch (DIPSW) Setting
  • 3. Function Switches
    • Types
    • [SYSTEM] Switch
• Connections
  • 1. 1 : 1 Connection
  • 2. 1 : n Connection (Multi-drop)
  • 3. n : 1 Connection (Multi-link 2)
  • 4. n : 1 Connection (Multi-link)
  • 5. Universal Serial Communications
  • 6. UG-Link
  • 7. PLC2Way
  • 8. Temperature Control Network
  • 9. Ethernet
• POD Operations
  • 1. Operational Procedures
    • POD Operation
  • 2. Main Menu Screen
    • Displaying the Main Menu Screen
    • Moving Back to the Screen in the RUN Mode
    • Main Menu Screen
    • 1. I/O Test
      • 1-1. USB Test
      • 1-2. Serial Connection Test
      • 1-3. SYSTEM & Function Switch Test
      • 1-4. Touch Switch Test
    • 2. Card Menu Screen
      • 2-1. Card Recorder Menu Screen
      • 2-2. Transferring Screen Data from a CF Card
      • 2-3. Saving Backup Copies of SRAM
      • 2-4. Messages during Data Transfer
    • 3. Communication Parameter Screen
    • 4. Extension Program Information
    • 5. Ethernet (Optional)
      • 5-1. Ethernet Information Screen
      • 5-2. IP Address Setting
    • 6. SRAM/Clock
    • 7. Extended Function Setting
• Error Correction
  • 1. Error Messages
    • 1. Communication Error
    • 2. Check
    • 3. Warning
    • 4. SYSTEM ERROR
    • 5. Touch Switch is Active
  • 2. Troubleshooting
    • In the Event of an Error
    • Probable Symptoms
• Inspection and Maintenance
  • 1. Inspection and Maintenance
    • Daily Inspection
    • Periodical Inspection
  • 2. Warranty Policy
    • Inquiries about Failure
    • Warranty Period
    • Free-of-charge Repair
    • Chargeable Repair
• Back Cover