Fuji Bikes FEH381 - Manual (Page 63)

5
1. 1 : 1 Connection 5-1
C
on
ne
ctio
ns
1. 1 : 1 Connection
• One set of the UG230 is connected to one PLC (1 : 1 connection).
• The host link unit of the PLC or the CPU port is used and the UG230 (master station) establishes
communications according to the protocol of the PLC. Consequently, it is not necessary to have
the dedicated communication program on the PLC (slave station). The UG230 reads the PLC
memory for screen display. It is also possible to write switch data or numerical data entered
through the keypad directly to the PLC memory.
• For more information on wiring and communication settings, refer to the User’s Manual <PLC
Connection> (FEH380).
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
RUN STOP
PLC
MJ2
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
RUN
STOP
PLC
CN1
RS-232C or RS-422 (RS-485)
UG230
RS-232C or RS-422 (RS-485)
UG230
[UG230 only]
[UG230 + UG230A-DCL]
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
RUN STOP
PLC
Read
Write
UG230