Fuji Bikes FEH381 - Manual (Page 104)

6
2. Main Menu Screen 6-31
P
O
D
O
per
at
io
ns
Setting 1
Set the IP address on the POD screen.
1. Open the “Ethernet” screen from the “Ethernet Information” screen using the [Ethernet] switch.
2. Set the IP address and other necessary options.
3. Press the [Setting Finished] switch to move back to the Main Menu screen.
Cursor switches
Increment/Decrement switch for
the value in the cursor position
Determines the setting such as IP address,
and moves back to the Main Menu screen.
Used for checking the
10BASE-T interface.
Normal: Connect
Error: Disconnect
The Ethernet screen is displayed.