Fuji Bikes FEH381 - Manual (Page 96)

6
2. Main Menu Screen 6-23
P
O
D
O
per
at
io
ns
When [Display <--> Card] is Selected:
1. When [Display <--> Card] is selected, the “Card Transfer” screen is displayed.
Screen data used for comparison is that in the DSP folder under the folder having the same name
as the access folder that is set by the UG00S-CW editor.
2. Press the [Start] switch.
3. During data transfer, the [Start] switch changes into [Busy] and flashes. When data has been
transferred successfully, the following window is displayed.
Press the [OK] switch.
If any other message is displayed, refer to page 6-26.
4. Press the [Return] switch. The “Card Menu” screen is displayed again.
Flashes during communication with the CF card.
Moves back to the previous
screen.
Indicates the free space
in the CF card.
Indicates the name of the
currently selected folder.
Starts transferring data
[Display --> Card].
Indicates the information of the currently selected folder.
If there is no screen data, this field becomes blank.