Fuji Bikes FEH381 - Manual (Page 107)

6-34 2. Main Menu Screen
Setting 4
Set the IP address on the editor.
1. On the editor, chick [System Setting], [Unit Setting] and [IP Address Setting]. The [IP Address
Setting] dialog is displayed.
2. Check [ IP Setting].
3. Check [ Select IP Address from Network Table]. Enter the network table number with which
POD’s IP address is registered.
4. Click the [OK] button and transfer the screen data. The IP address set above can be checked on
the “Ethernet Information” screen to be displayed from the Main Menu screen.