Fuji Bikes FEH381 - Manual (Page 102)

6
2. Main Menu Screen 6-29
P
O
D
O
per
at
io
ns
5. Ethernet (Optional)
The “Ethernet Information” screen is displayed by pressing the [IP Address (English)] switch on the
initial screen when transferring screen data via Ethernet for the first time, or by pressing the [Ethernet
Information] switch on the Main Menu screen when transferring screen data to a UG230 equipped with
the option unit UG230A-DCL.
5-1. Ethernet Information Screen
This screen is used to check the current IP address, port number, or error.
Pressing the [Ethernet] switch brings up the “Ethernet” screen for IP address setting.
To move back to the previous “Ethernet Information” screen, press the [Ethernet Information] switch.
CAUTION
When performing Ethernet communication on the UG230, the option unit UG230A-DCL
must be installed.
The Main Menu screen is displayed again.
Moves to the “Ethernet” screen for IP Address
Setting. (See “IP Address Setting” (page 6-30))