Fuji Bikes FEH381 - Manual (Page 75)

6-2 1. Operational Procedures
Initial Screen
When the power of POD is turned on for the first time, the Main Menu screen shown below on the left
is displayed.
Transferring Screen Data for the First Time
There are some methods for transferring screen data for the first time.
• UG230 only
1. Transferring screen data via the UG00C-T or USB cable
Transfer screen data from the computer while the initial screen is displayed.
2. Transfer screen data from a CF card (USB CF card reader/writer) or a memory card
(UG00P-MR).
1) Transfer screen data from the computer to the desired card.
2) Connect a USB CF card reader/writer or a UG00P-MR to the UG230, and insert the card.
3) Press the [CF Card (English)] switch. The “Card Menu” screen
is displayed.
4) Follow the instructions as described in “Card Menu Screen”
(page 6-15) and transfer screen data.
Initial screen displayed when power is turned
on for the first time Main Menu screen after transferring screen
data