Fuji Bikes FEH381 - Manual (Page 2)

Preface
Thank you for selecting the Fuji Programmable Operation Display, POD UG230 Series (called as the UG230 or
POD hereafter).
This User’s Manual <UG230 Hardware> explains system configuration, specifications and handling of the UG230
Series. To enable you to fully utilize the display, carefully read this User’s Manual.
For more information on the UG230 Series, refer to the following manuals as well.
For further details about PLCs (programmable logic controllers), see the manual attached to each PLC.
Name Manual No. Contents
UG Series <Operation> FEH375 Describes operating procedures of the screen editor
(UG00S-CW) for the UG Series.
UG Series <Function> FEH376 Describes the functions available with the UG30/20
Series.
UG Series <PLC Connection> FEH380 Describes connections with PLCs, universal serial
communications, etc.
UG Series <Supplementary Manual> FEH376-1 Supplementary information for the UG Series
<Function>
UG Series <Tutorial> FEH350 Tutorial manual for novices in the UG Series
Notes:
1. This manual may not, in whole or in part, be printed or reproduced without the prior written consent of
Fuji Electric FA Components & Systems Co., Ltd.
2. The information in this manual is subject to change without prior notice.
3. Windows and Excel are registered trademarks of Microsoft Corporation in the United States and other
countries.
4. All other company names or product names are trademarks or registered trademarks of their
respective holders.
5. This manual is intended to give accurate information about POD hardware. If you have any
questions, please contact your local distributor.