Document Outline

• iSCSI SR2122 Storage Router Getting Started Guide
• About this Document
  • Getting Started Guide Information
  • Intended Audience
  • Other iSCSI SR2122 Storage Router Documentation
  • Figures
  • iSCSI Protocol
  • Assumptions
• iSCSI in a Heterogeneous SAN
  • Typical Network Structure
    • Figure 1: IP/FC Network Example
    • iSCSI Initiator
    • IP Network
    • SR2122 iSCSI router
    • Fibre Channel SAN
    • SAN Storage
• SR2122 Hardware and Software Support
  • Storage Array Hardware Support
  • Fibre Channel Switch Hardware Support
  • Network Interface Controller (NIC) Hardware Support
  • Operating System Software Support
  • Microsoft Initiator Support
  • Compaq Network Teaming Software Support
  • SR2122 Management Software Support
• SR2122 Configuration Rules
  • SR2122 Router Rules
    • Table 1: SR2122 Router Rules
  • ISCSI Host Rules
    • Table 2: iSCSI Host Rules
  • Operating System Rules
  • Microsoft Initiator Rules
  • Storage Array Rules
  • Fibre Channel Switch/Fabric Rules
  • Management Software Rules
• Configuring the SR2122 iSCSI Storage Router in a SAN
  • SR2122 Setup
    • Figure 2: GUI Display of the FC port WWPN
  • Adding a Standalone SR2122 to a SAN
    • Figure 3: Standalone SR2122; Single SAN
    • Figure 4: Standalone SR2122; Dual SANs
  • Adding a Clustered SR2122 to a SAN
    • Figure 5: Clustered SR2122
• Serving Fibre Channel Storage to the SR2122
  • Presenting MSA1000 LUNs to the SR2122
  • Presenting RA/MA8000, ESA/EMA12000, and EMA16000 LUNs to the SR2122
  • Presenting Enterprise Storage Array (EVA) LUNs to the SR2122
    • Figure 6: Host Properties
    • Figure 7: Virtual Disk Properties Entry
  • Presenting VA LUNs to the SR2122
  • Presenting XP LUNs to the SR2122
• Serving Storage to the iSCSI Initiators from the SR2122 over IP
  • SR2122 Devices
  • SR2122 Access Lists
    • Table 3: SR2122 Access List
    • Figure 8: Access List Entry
    • Figure 9: iSCSI Initiator Name
    • Figure 10: iSCSI Initiator IP Address
    • Figure 11: Completed Access List Entry
    • SR2122 SCSI Router Instances
      • Figure 12: SCSI Router Instance Structure
    • Creating a SCSI Router Instance
      • Table 4: SCSI Router Instance Example
      • Figure 13: SCSI Router Instance Name and Description
      • Figure 14: Add Target Name and Access List Entry
      • Figure 15: Configure/Add LUN
      • Figure 16: Add New Lun
      • Figure 17: Add Second LUN
      • Figure 18: New LUNs
      • Figure 19: All SCSI Router Instances
      • Figure 20: Instance iSCSI03
      • Figure 21: Secondary Interface
  • iSCSI Initiator Setup
  • HP iSCSI Initiator Setup for Windows 2000 and Windows 2003
    • Figure 22: SCSI Router Instance IP Address
    • Figure 23: iSCSI Configuration Application
    • Figure 24: iSCSI Configuration Screen
    • Figure 25: iSCSI Connection Status
    • Table 5: Possible Connect States
    • NOTINIT
    • UP
    • DOWN
    • LOGIN
    • ACTIVE
    • BREAK
    • WAIT
    • DISABLED
    • HELD
  • Microsoft iSCSI initiator Setup for Windows 2000 and Windows 2003 Server
    • Figure 26: iSCSI Initiator Properties
    • Figure 27: Add Target Portal
    • Figure 28: Log On to an Available Target
    • Figure 29: Verify Connection
    • Figure 30: Session Details
  • iSCSI Initiator Setup for Red Hat Linux
    • Loading the iSCSI Driver
    • Device Names
    • Target Bindings
    • Mounting File systems
    • Unmounting File systems
    • Dynamic LUN and Target Discovery
    • The "/proc/scsi/iscsi” directory
    • Kernel Upgrades
  • Configuring hp StorageWorks Secure Path for Windows with the SR2122 Storage Router
    • Figure 31: Secure Path configuration example
  • SAN/Storage Setup
  • Setup for EMA/ESA12000, EMA16000, MA/RA8000, MA6000
  • Setup for EVA
    • SR2122 Setup
      • Creating the SCSI Router Instance
      • On SR2122 Node A:
      • On SR2122 Node B:
      • To display Node A router information:
    • Hp Storageworks Secure Path for Windows Setup
    • iSCSI Initiator Setup
      • Figure 32: Iscsi03 HP Config Screen Example
      • Figure 33: Checking that SR2122 Targets are Active
      • Figure 34: Secure Path Manager Example
  • Windows MSCS Cluster Support
    • Figure 35: MSCS Cluster with SR2122 Routers Example
    • Figure 36: Secure Path Manager Example
• SR2122 / Insight Manager 7 Service Pack 2 Integration
  • Integration Components
    • Insight Manager 7 SP 2
      • Table 6: Management Server Hardware and Software Minimum Requirements
    • SR2122 Management Port
  • Configuring the SR2122 to integrate with IM 7 SP2
    • Figure 37: Valid SR2122 Management Port TCP/IP Configuration
    • Figure 38: Network Management Configuration
  • Configuring IM 7 SP2 to integrate with the SR2122
    • Discovering the HP SR2122
      • Automatic Discovery
        • Figure 39: Automatic Discovery
        • Figure 40: Discovery Filters
      • Manual Discovery
        • Figure 41: Manual Discovery
    • SNMP Customizations
      • SNMP Community Strings
      • SNMP Authentication Trap Enabling
        • Figure 42: SNMP Authentication Trap Enabling
        • Figure 43: SNMP Trap Edit
        • Figure 44: SNMP Network Query
• Sample Configurations
• F.45: Example of Multiple OS Systems in a Non-Redundant Path Configuration
• F.46: Windows 2000 Servers with NIC Teaming: 2 Node SR2122 Cluster
• F.47: Maximum SR2122 Cluster Configuration Using HA Ports