Sr2122 management port, Configuring the sr2122 to integrate with im 7 sp2 – HP ISCSI SR2122 User Manual
Page 58
SR2122 / Insight Manager 7 Service Pack 2 Integration
58
iSCSI SR2122 Storage Router: Getting Started Guide
MSDE 2000 can be found on the Management CD and can be automatically installed for you
if you do not already have a database available and running. You must have a database engine
installed in order for the Insight Manager 7 installation to continue.
If you install SNMP services after installing Microsoft Windows Operating System Service
Pack, reinstall the service pack.
The Insight Manager 7 server and the database server must be in the same time zone. In
addition, you should employ best practices to ensure time synchronization among the set of
management server and browser machines.
SR2122 Management Port
The SR2122 Management Port is a 10/100 Ethernet connection that must have LAN
connectivity to the ProLiant running IM 7, in order to manage it. This implies that the SR2122
has a legitimate IP address, and is able to route its TCP/IP and SNMP traffic to the network
devices working with it. It also assumes that the SR2122 has been enabled to be managed and
is configured correctly for the level of SNMP and management support.
SR2122 SNMP V1 MIBs which effect IM 7 are:
— MIB II (RFC 1213, and RFC 1215)
— Fibre Alliance MIB V2.2
Configuring the SR2122 to integrate with IM 7 SP2
First, the SR2122 10/100 Management Port must be enabled. The Management port provides
TCP/IP/ICMP/SNMP network connectivity to the Management Server running IM 7 SP2
There are a number of settings that have to be configured in order to make the SNMP V1
integration with IM 7 to work. Here is a valid SR2122 Management Port TCP/IP
configuration:
Database Software for Server
Microsoft SQL 7.0 MSDE, with Service Pack 4
or later (local upgrades only)
Microsoft SQL Server 7.0 Standard, with
Service Pack 4 or later
Microsoft SQL Server 7.0 Enterprise, with
Service Pack 4 or later
Microsoft SQL 2000 Personal, with Service
Pack 1 or later (local only)
Microsoft SQL 2000 Standard, with Service
Pack 1 or later
Microsoft SQL 2000 Enterprise, with Service
Pack 1 or later
Microsoft SQL 2000/MSDE, with Service Pack
1 or later (local only)
All database software for servers are
requirements for local and remote unless
otherwise noted.
Table 6: Management Server Hardware and Software Minimum Requirements (Continued)
Management Server Feature
Minimum Requirements