HP ISCSI SR2122 - Manual (Page 54)

Serving Storage to the iSCSI Initiators from the SR2122 over IP
54 iSCSI SR2122 Storage Router: Getting Started Guide
Note: The Access List Name assigned to the IP address does not necessarily have to be the IP
address's DNS name.
The iSCSI Target(s) on both SR212 routers must contain the same MSCS Cluster Access List
Entry to ensure proper failover/failback of the iSCSI disk drives.
Next, add both Router Instance IP addresses to each MSCS Cluster member's iSCSI driver.
Open the hp iSCSI Config configuration screen and add the IP addresses of the SCSI Router
Instances from each SR2122 Node A and Node B, 33.33.33.103 and 33.33.33.104,
respectively
A reboot of both MSCS Cluster members is necessary in order for these changes to take effect.
SR2122 Name Access List Entry name Access List Entries
Node A ArticX-Cluster 33.33.33.01
33.33.33.02
Node B ArticX-Cluster 33.33.33.01
33.33.33.02
SR2122 Name
Router Instance/ IP
Address
Target
Name
Access List Entry Assigned
to this Target
Node A ISCSI03_Disks
33.33.33.103
HSV23_T1 ArticX-Cluster
Node B ISCSI03_Disks
33.33.33.104
HSV23_T2 ArticX-Cluster
MSCS Cluster Member Add Router Instance IP Addresses
ARTICX0015 33.33.33.103
33.33.33.104
ARTICX0031 33.33.33.103
33.33.33.104