HP ISCSI SR2122 - Manual (Page 18)

Serving Fibre Channel Storage to the SR2122
18 iSCSI SR2122 Storage Router: Getting Started Guide
The Show Connections command will now display:
HSG80> show connections
ISRFC1-P1 WINNT OTHER 1 0D0F00 OL other 80
HOST_ID=1000-0002-3D07-1E60 ADAPTER_ID=2800-0002-3D07-1E60
ISRFC1-P2 WINNT THIS 2 0D0F00 OL this 180
HOST_ID=1000-0002-3D07-1E60 ADAPTER_ID=2800-0002-3D07-1E60
Next, an HSG80 Volume Unit can be assigned to the SR2122’s FC port WWPN using the
connection name.
For example, a Show Unit command may display:
HSG80> Show Units
LUN Uses Used by
--------------------------------------------------------------
D1 DISK10000
D2 DISK10100
D3 DISK30000
D4 DISK30100
D81 DISK40300
D107 DISK20000
D108 DISK20100
D181 DISK40400
To present Unit 81 to the SR2122 the command would be:
HSG80> set D81 enable=isrfc1-p1
To verify D81 is enabled only for the SR2122 type the command:
HSG80> Show D81
LUN Uses Used by
-----------------------------------------------------------------------
D81 DISK40300
LUN ID: 6000-1FE1-0007-BB40-0009-9500-4670-004F
NOIDENTIFIER
Switches:
RUN NOWRITE_PROTECT READ_CACHE
READAHEAD_CACHE WRITEBACK_CACHE
MAX_READ_CACHED_TRANSFER_SIZE = 32
MAX_WRITE_CACHED_TRANSFER_SIZE = 32
Access:
ISRFC1-P1
State:
ONLINE to the other controller
Size: 35556389 blocks
Geometry (C/H/S): ( 7000 / 20 / 254 )