Fluke RUSKA 7350 - Manual (Page 14)

RUSKA 7350
Users Manual
1-4
Ease of Operation
An intuitive, menu-driven interface makes the RUSKA 7350 easy to use. Frequently
used selections, such as the units of measure, are stored in memory each time the
RUSKA 7350 powers up.
Easily Programmable
The RUSKA 7350’s powerful microprocessor provides the basis for smart electronics.
With a few simple keystrokes, the user set limits on the system pressure, create unique
units of measure, program a test sequence, and more.
Attractive Desktop Packaging
A sturdy aluminum case houses all of the RUSKA 7350’s pneumatics, electronics, and
user controls. With the optional rack mount kit, this standard 19" EIA chassis fits easily
into a rack mount system.
Power-On Self Test
Upon power-up, the RUSKA 7350 quickly tests its hardware and software. After the
RUSKA 7350 completes this test, the user can select more extensive self-tests for the
pneumatics and electronics.
Ease of Calibration
A four-point calibration can be performed either remotely or entirely from the front panel.
No disassembly is required, and there are no potentiometers to tune.
Automatic Zero Adjust
At the user’s request, the RUSKA 7350’s software automatically performs the zero
adjustment, with no potentiometers to tune.
Automatic Head Correction
The RUSKA 7350 automatically corrects for head pressure between the RUSKA 7350
and the device under test (DUT), taking into account the density of the test gas.
Choice of Medium
The Pneumatic RUSKA 7350 can be used with any dry, clean nitrogen as the pressure
medium.
Choice of Display Units
Standard units include inches of mercury at 0 °C and 60 °C, kiloPascals, bars, pounds per
square inch, inches of water at 4 °C, 20 °C, and 25 °C, kilograms per square centimeter,
millimeters of mercury, centimeters of mercury at 0 °C, and centimeters of water at 4 °C.
Altitude and airspeed units include feet, meters, knots, and kilometers/hour. In addition to
these predefined units, four user-defined units are programmable.
Communications Interface
The RUSKA 7350 includes standard RS-232 serial and IEEE-488 interfaces. The user’s
computer communicates with the RUSKA 7350 through the Standard Commands for
Programmable Instruments (SCPI) protocol. The RUSKA 7350 can also be configured to
accept existing software written for the RUSKA Series 6000 DPG.