Fluke RUSKA 7350 - Manual (Page 38)

RUSKA 7350
Users Manual
4-14
1. The pressure units are defined from the Menu | Units | Define. From the Main Menu
(press PREVIOUS until the Main Menu appears) press Menu [F6 ⎢Setup [F2]
⎢Units [F3].
2. Use the rotary knob to highlight the desired user-defined unit, and then select the Edit
Name [F1] function key.
3. The following sequence is used to change the name of the selected unit.
a. Use the < [F4] or > [F5] key to highlight the desired character in the matrix.
b. Use the rotary knob to change the character.
c. Repeat steps a and b until the desired name is entered. Press the Clear key to
start over.
d. Press the Done [F6] key when the name change is completed.
gld15.bmp
Figure 4-13. Menu | Setup | Units | Edit Name - Menu
4. Use the rotary knob to highlight the desired user-defined unit that has just been
renamed.
5. Use the numeric keypad to enter the conversion factor and press ENTER to accept.
6. Press PREVIOUS three times to return to the Main Menu. The new unit definition
may now be selected using the Units key.