Furuno NAVNET 1724C User Manual

Page 182

Advertising
background image

7. CUSTOMIZING YOUR UNIT

7-13

Plotter function keys

Menu Item

Function

Function Key
Label

OFF

Assigns no function.

ADD: ADD NEW WPT

Registers waypoint at cursor position. Place cursor
for waypoint location, then press function key.

ADD

MWP: MOVE WPT

Moves selected waypoint to different position.
Select waypoint, press function key, select new
position, then press the ENTER knob.

MWP

RUL: RULER

Measures range and bearing between two points.
Press START POINT soft key to change starting
point if necessary. Range and bearing between two
points appears at the top of the screen.

RUL

GWP: GOTO WPT

Specify waypoint to set as destination. Enter
waypoint name in window, then press the ENTER
soft key.

GWP

GRT: GOTO ROUTE

Specify route to follow. Enter route name in window,
then press the ENTER soft key.

GRT

EML: EDIT MK/LINE

Displays mark & line menu. Press appropriate soft
key to access menu item.

EML

TRK: TRACK ON/OFF

Each press starts or stops recording/plotting own
ship’s track.

TRK

TTM: TTM ON/OFF

Turns TTM (target track) display on/off.

TTM

DTT: DEL TGT TRACK

Erases all TTM track.

DTT

ALP: ALPHA LIST

Displays waypoint alphanumeric list.

ALP

LCL: LOCAL LIST

Displays waypoint local list.

LCL

RTE: ROUTE LIST

Displays route list.

RTE

DBX: D. BOX ON/OFF

Shows/hides data boxes.

DBX

CHG: CHANGE CNTRL

Changes control in combination screen.

CHG

QP: QUICK POINT

Quick point function

QP

MRK: MARK ENTRY

Enters the mark at the cursor position.

MRK


Note:
To use CHANGE CNTRL set it on all displays, with the same soft key number.

Advertising
This manual is related to the following products: