Furuno NAVNET 1724C - Manual (Page 99)

3. PLOTTER OPERATION
3-28
SELECT MARK
Waypoint mark shape selection window
8. Operate the Cursor pad to select shape desired.
9. Press the ENTER soft key.
10. Press the SELECT MARK and MARK COLOR soft keys in that order to open the
waypoint mark color selection window. Select the color desired, then press the ENTER
soft key.
SELECT COLOR
▲
¤ RED
¡ YELLOW
¡ GREEN
¡ LIGHT BLUE
¡ PURPLE
¡ BLUE
¡ WHITE
▼
Waypoint mark color selection window
Note:
You cannot change the shape and color of a waypoint when the proximity alarm
radius for it is other than “zero.” To change shape or color, enter all zeroes as the
proximity alarm radius.
11. You can change the name (6 characters), comment (13 characters), L/L position and the
proximity alarm radius for a waypoint as follows:
Use the Cursor pad to select the NAME, COMMENT, position box or PROXIMITY ALARM
RADIUS field. (“Proximity alarm radius” provides for audio and visual alarms when your
boat nears a waypoint by the distance specified. The proximity alarm must be turned on
in the ALARM menu to use this feature. For details see the paragraph 3.11.6.)
Use the Cursor pad to select location.
Enter appropriate alphanumeric character with the ENTER knob.
12. Press the SAVE soft key to register the waypoint.
13. Enter another waypoint, or press the MENU key to close the menu.