Fluke 5020A - Manual (Page 56)

5020A
Users Manual
5-20
avu026.jpg
Figure 5-25. Stats Setting
The B C buttons are used to change the setting parameters. Press the E button to save
the new setting. Press the F button to cancel any changes and to exit to the menu.
Stats View
The STATS VIEW function is used to view daily statistics. Select a date and
measurement channel and type. The average, standard deviation, minimum, maximum,
spread, number, maximum rate, and alarm are displayed for the channel and
measurement type.
avu027.jpg
Figure 5-26. Stats View
The B C buttons are used to change the setting parameters. Press the E button to save
the new setting. Press the F button to cancel any changes and exit to the menu.
Stats Print
The STATS PRINT function allows daily statistics to be printed over serial or IR. The
PORT setting may be set to SERIAL or IRDA/IR COMM). Either IRDA or IR COMM is
available for the IR port depending onthe IR MODE setting