Fluke 5020A - Manual (Page 64)

5020A
Users Manual
5-28
avu039.jpg
Figure 5-38. System Menu
The A D buttons are used to select the menu option. The B C buttons are used to change
the parameter settings. Press the E button to save the new setting. Press the F button
to cancel any changes and exit to the menu.
System Setting
The SYSTEM SETTING function allows you to change the temperature measurement
unit.
The UNIT parameter switches between C (Celsius) or F (Fahrenheit). This may be
password protected with the SENSOR password parameter.
When the measurement unit is changed and the E button is selected, the next
measurement is displayed in the new measurement unit.
avu040.jpg
Figure 5-39. System Setting
The B C buttons are used to change the setting parameters. Press the E button to save
the new setting. Press the F button to cancel any changes and exit to the menu.