Furuno NX-300 - Manual (Page 25)

2-3
4. Press ! or " to select menu item and press the [ENT] key. For example, select RCV ALARM.
Corresponding option menu appears.
Figure 2-7 ON/OFF window
5. Press ! or " to select option desired.
6. Press the [ENT] key to resister your selection.
7 Press the [MENU] key once to return to the menu or twice to quit the menu.
2.5 Selecting Stations
The STATION SELECTION menu allows you to select what stations to receive, automatically or
manually. In the AUTO mode stations are automatically selected according to the distance
between own ship and NAVTEX stations. External navigational data is required to use the AUTO
mode. If it is not input, all stations are selected. In the MANUAL mode you can select what
stations you wish to receive. Default setting is the AUTO mode.
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select STATION SELECTION.
3. Press the [ENT] key. The MODE window appears.
Figure 2-8 MODE window
4. Press ! or " to select AUTO or MANUAL as desired.
5. For the AUTO mode, press the [ENT] key to close the menu.
For the MANUAL mode, do the following:
a) Press the [ENT] key. The STATION SELECTION menu appears.
Figure 2-9 STATION SELECTION menu
b) Press ! or " to select a station you want to change the current setting.
c) Press the [ENT] key to show the following window.
Figure 2-10 RECEIVE/IGNORE window