4 changing received message log window – Furuno NX-300 User Manual
Page 42
Advertising
4-2
4.4 Changing Received Message Log Window
You can show received frequency on the received message log as shown below.
1. Press the [PWR] key while pressing !to turn the power on and release the keys after
display appears.
2. Press the [DISP] key to show the received message log. The received frequencies (518 kHz
and 490 kHz) are displayed on the window.
Figure 4-2 Received message log
3. To restore it, do step 1.
Advertising