Furuno NX-300 - Manual (Page 38)

3-4
3.5 Delete All Messages
This function deletes all messages NX-300 saves.
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select SYSTEM MENU.
3. Press the [ENT] key to show the SYSTEM MENU.
4. Press " to select DELETE ALL MESSAGES.
5. Press the [ENT] key. The following window appears.
Figure 3-6 DELETE ALL MESSAGES window
6. Press # to select YES.
7. Press the [ENT] key.
8. Press the [MENU] key or [DISP] key to close the SYSTEM MENU.
3.6 User Display of Navigation Data
The NX-300 can function as nav data display when connected to navigation equipment.
You may choose what data to display in the three cells below the date and time indications on the
nav data display. The choices of data are speed, course, range, bearing, power source voltage
and position in latitude and longitude (not available for “LEFT” or “RIGHT”).
LARGE
LEFT RIGHT
01-JAN-00 15:37:40
Figure 3-7 Location of nav data indications
1. Press the [MENU] key to open the main menu.
2. Press " to select USER DISPLAY.