Furuno NX-300 User Manual
Page 29
Advertising
2-7
Setting for communication software on PC
Baud Rate:
4800 bps
Character Length:
8 bit
Stop Bit:
1 bit
Parity:
None
X Control:
XON/XOFF
Downloading messages to a PC
Set up the computer to receive data. Messages are downloaded to a PC character by character
during reception.
To download all messages saved in NX-300, do the following;
1.
Press the [MENU] key to open the main menu.
2.
Press
! or " to select FUNCTIONS.
3.
Press the [ENT] key to show the FUNCTIONS menu.
4.
Press
" to select SAVE MESSAGE TO PC.
5.
Press the [ENT] key. The following display appears.
Figure 2-17 SAVE MESSAGE TO PC display
6.
Press the [ENT] key.
Figure 2-18 SAVING START window
7.
Set up the computer to receive data.
8.
Press
# to select YES and press the [ENT] key.
Advertising