Furuno NX-300 - Manual (Page 26)

2-4
d) Press ! or " to select RECEIVE or IGNORE depending on whether you want to select or
deselect the station.
e) Press the [ENT] key.
f) Repeat steps b) to e) to select or deselect other stations.
g) Press the [MENU] key or [DISP] key to close the STATION SELECTION menu.
2.6 Selecting Messages
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select MESSAGE SELECTION.
3. Press the [ENT] key to show the MESSAGE SELECTION menu.
Figure 2-11 MESSAGE SELECTION menu
4. Press ! or " to select a message you want to change the current setting.
5. Press the [ENT] key to show the following window.
Figure 2-12 RECEIVE/IGNORE window
6. When you change RECEIVE into IGNORE for message type A, B, D or L, the following
window appears to confirm. For all other message types proceed to step 8.
Figure 2-13 Ignore message window
7. Press # or $ to select YES or NO. Select YES to change the current setting, or NO not to
change.
8. Press the [ENT] key.
9. Repeat steps 4 to 8 to select or deselect other message types.
10. Press the [MENU] key or [DISP] key to close the MESSAGE SELECTION menu.