Reviewing the card count self-test, Reviewing the magnetic test option – FARGO electronic DTC500 User Manual
Page 132
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
132
Reviewing the Card Count Self-Test
Step
Procedure
1
Use this card to view counts for Card Count (CC), Pass Count (PC) and Transfer
Count (TC) and Lamination Count (LC).
The Card Count is the total number of cards the Printer has produced. Pass
Count is the total number of print passes made by the Printhead. (Note: A
pass is measured each time a single Ribbon panel is printed or passes
beneath the Printhead.)
The Transfer Count is the total number of times the Printer transfers an image
to a card.
Reviewing the Magnetic Test option
Step
Procedure
1
Use this option only applies if a Magnetic Encoding module is installed in the
Printer. (Note: The Printer will feed, encode and eject a card. Be sure to have
high Coercivity cards installed when running this test.)