FARGO electronic DTC500 - Manual (Page 152)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 152
Safety Messages (review carefully) (continued)
IMPORTANT! Fargo Card Printers require highly specialized print Ribbons to function
properly. To maximize Printer life, reliability, printed card quality and durability, you must use
only Fargo Certified Supplies. For this reason, your Fargo warranty is void, where not
prohibited by law, if you use non-Fargo Certified Supplies. To order additional materials,
please contact your authorized reseller.
Adjusting the Internal Card Guide
The Internal Card Guide holds the card in position as it feeds through the Printer. This guide
is factory-set to handle both CR-79 sized cards and standard CR-80 sized cards (with
thicknesses ranging from 20 to 50 mil).
Securing Peg
Internal Card
Guide
Continued on the next page