FARGO electronic DTC500 - Manual (Page 27)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 27
Agency Listings
Term Description
Emissions
Standards EMC: ITS (EN 55022 Class B:1995), FCC Class B, EN 50082-1:1997,
BSMI, CRC c1374, CE and CCIB
Safety
Standards UL 1950, CSA C2.2 (No.950-95) and T
ü
V-GS (IEC-950), CE and
CCIB.
Technical Specifications
Term Description
Accepted
Standard Card
Size CR-79 Adhesive Back: 3.303 in. x 2.051 in. (83.9mm x 52.1mm)
(cannot be laminated with DTC515-LC or DTC525-LC)
CR-80: 3.375 in. x 2.125 in. (85.6mm x 54mm) (corresponds to ID1)
Accepted Card
Thickness .010 in. (10 mil) to .050 in. (50 mil) (.254mm to 1.27mm); unless
laminating.
Accepted Card
Types HID Proximity Cards, Mifare Contactless Smart Cards and Contact
Smart Cards
Accepted Card
Compositions PVC or polyester cards with polished PVC finish; monochrome resin
required for 100% polyester cards.
Barcodes Code 39, Code 128 B & C with and without check digit (available with
embedded font and bar code option): 2 of 5, UPC-A, EAN 13 and
PDF-417 2D bar code and other symbologies (available via Windows
driver).
Card Input
Hopper Capacity

DTC510/520: Single-stack hopper, 100 cards (30 mil); auto or
manual feed

DTC515/525: Dual-stack hopper, 200 cards (30 mil); auto or
manual feed

DTC515-LC/525-LC: Dual Hopper; 200 cards (.030
”
); auto or
manual feed
Card Output
Hopper Capacity 100 cards (30 mil)
Continued on the next page