Developing system, Fusing mechanism, Toner – Farallon Communications QMS 4525 User Manual
Page 137: Cleaning system, Power consumption, Electrical requirements - us version
Print Engine
Specifications
B-5
Technical Specifications
Developing System
Magnetic brush development with mono-component toner. Toner can
be refilled by the system administrator or by a QMS Service Engineer.
Fusing Mechanism
Heat and pressure.
Toner
Print capacity per 3.2 lb (1.45 kg) bottle of toner: 55,000 prints.
Total toner bin print capacity–192,500 prints.
Cleaning System
Magnetic brush cleaning.
Power Consumption
The following figures reflect the average power dissipation per hour:
Switched off (only dew prevention functioning): 50 W
During warm-up: 3500 W
On stand-by: 800 W
Operating: 1750 W
During printing (with 20-bin sorter installed): 2100 W
Electrical Requirements - US Version
One phase 208 V (+10%); max. 16 A; 60 Hz (+2%)
One phase 230 V (+10%); max. 15 A; 60 Hz (+2%)