Furuno BACK GP-80 - Manual (Page 23)

2 – 5
2.10 Apportioning the
Memory
The memory holds 2,000 points of track and
marks and may be apportioned as you like.
The default memory setting stores 1,000
points each of track and marks.
CAUTION
All data are erased whenever the memory
apportion setting is changed, even when the
previous value is re-entered.
To store 1,500 points of track and 500 marks,
for example, do the following:
1) Press the [MENU ESC] key.
2) Press [9] to display the SYSTEM SET-
TINGS menu.
Figure 2-8 SYSTEM SETTNGS menu
3) Press [1] to display the PLOTTER SETUP
menu.
Figure 2-9 PLOTTER SETUP menu
4) Press ▲ or ▼ to select Memory Appor-
tion.
5) Enter amount of track to store, in four dig-
its. To store 1,500 track points, for ex-
ample, press [1] [5] [0] [0].
6) Press the [NU/CU ENT] key, or ▲ or ▼.
You are asked if it is all right to erase all
data.
Figure 2-10
7) Press the [NU/CU ENT] key.
8) Press the [MENU ESC] key.
2. UNIT SETUP
SYSTEM SETTINGS
1. PLOTTER SETUP
2. UNIT SETUP
3. DATA 1, 3 OUTPUT SETUP
4. DATA 2 OUTPUT SETUP
5. DATA 4 I/O SETUP
6. GPS SETUP
7. DGPS SETUP
8. LOP SETUP
9. CLEAR MEMORY
2. UNIT SETUP
ENT: Enter MENU: Escape
PLOTTER SETUP
Bearing Ref.
Auto
(07° W)
Man
(00° E)
ENT: Enter MENU: Escape
Memory Apportion
Mag Variation
True
Trk = 1000 / 2000Pt
Mag
R.L G.C Calculation
User defined #1 RNG
User defined #2 SPD
User defined #3 BRG
User defined #4 CSE
Setting erases all data!
Are you sure to change ?
ENT: Yes MENU: No