Furuno BACK GP-80 - Manual (Page 45)

6 – 1
6. SETTING UP
VARIOUS DISPLAYS
6.1 Selecting Data to Display
on the Data Display
The user may select what data to display in
four locations on the data display.
Figure 6-1 Data display
The data the user may select to display are;
• Altitude (ALT)*
• Average course (AVR CSE)
• Average speed (AVR SPD)
• Course (CSE)
• Course error (dCSE)
• Cross track error (XTE)
• Depth (W.DPT)#
• ETA to waypoint (ETA)
• Range to waypoint (RNG)
• Route time-to-go (RT.TTG)
• Speed (SPD)
• Time-to-go to waypoint (TTG)
• ETA to route
• Total route distance (RT.DIST)*
• Trip distance (TRIP)
• Trip elapsed time (TRIP TM)
• Water temperature (W.TMP)#, and
• Velocity to destination (VTD)*
*ALT: Displayed only in 3D position fixing.
*RT. DIST: Total distance from current position
to ultimate destination. Appears when following
a registered route or a cursor-created route.
*VTD: When following a route, plus or minus
appears next to indication to denote which
direction the route is being traversed.
# Requires external sensor
1) Press [MENU ESC] [9] and [1] to dis-
play the PLOTTER SETUP menu.
Figure 6-2 PLOTTER SETUP menu
2) Press ▲ or ▼ to select one of four of "User
defined" (#1, #2, #3, #4).
3) Press t or s to select data to display.
4) Press the [NU/CU ENT] key. To select the
data to display at other user defined dis-
plays, repeat steps 2 and 3.
5) Press the [MENU ESC] key.
SEP 12, 1995 23:59'59" U DGPS 3D
12
°
23.456' N
123
°
23.456' E
POSITION
RNG
31.23
nm
SPD
12.3
kt
BRG
223.4
°
CSE
123.4
°
TO : 001
MARINE
POINT1
NEXT
: 002
MARINE
POINT2
User-defined
display data #1
User-defined
display data #2
User-defined
display data #4
User-defined
display data #3
User-defined
display window
WGS72 PLOTTER SETUP
Bearing Ref.
Auto
(07
°
W)
Man
(00
°
E)
ENT:Enter MENU:Escape
Memory Apportion
Mag Variation
True
Trk = 1000 / 2000Pt
Mag
R.L G.C Calculation
User defined #1 SPD
User defined #2 CSE
User defined #3 RNG
User defined #4 BRG