Furuno BACK GP-80 - Manual (Page 57)

8 – 5
Waypoint mark size
The size of the waypoint mark can be selected
to large or small.
Figure 8-5 Waypoint mark size
1) Press [MENU ESC] and [1].
2) Press ▲ or ▼ to select Waypoint Size.
3) Press t or s to select Large or Small.
4) Press [NU/CU ENT] and [MENU ESC].
Cursor size
The size of the cursor can be selected to large
or small.
Figure 8-6 Cursor size
1) Press [MENU ESC] and [1].
2) Press ▲ or ▼ to select Cursor Size.
3) Press t or s to select Large or Small.
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
Enlarging characters
The size of the indications of position or user
defined display areas can be enlarged on the
Data display.
1) On the Data display, with no enlarged
characters, press the [CURSOR ON/OFF]
key to turn on the cursor.
2) Operate the cursor keys to select data to
enlarge in the window.
3) Press the [ZOOM IN] key.
To switch character size from enlarged to nor-
mal, press the [ZOOM OUT] key at step 3.
Figure 8-7 How to enlarge indications on
the data display
SEP 12, 1995 23:59'59" U DGPS 3D
N12
°
E123
°
POSITION
23.456'
23.456'
SEP 12, 1995 23:59'59" U DGPS 3D
12 ° 23.456' N
123 ° 23.456' E
POSITION
RNG
31.23
nm
SPD
12.3
kt
BRG
223.4 °
CSE
123.4 °
TO : 001
MARINE
POINT1
NEXT
: 002
MARINE
POINT2
ZOOM
IN
ZOOM
OUT
Cursor Position
User-defined
display window
WGS84
WGS84
Large cursor Small cursor
No icon With icon
12
12
Large waypoint mark
Small waypoint mark