Furuno BACK GP-80 - Manual (Page 26)

3 – 2
Figure 3-4
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
3.2 Selecting Mark Shape
13 mark shapes are available. Select mark
shape as follows:
1) Press [MENU ESC] and [2] to display the
TRACK/MARK SETUP menu.
Figure 3-5 TRACK/MARK SETUP menu
2) Press ▲ or ▼ to select Mark Shape.
3) Press t or s to select mark shape de-
sired.
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
The next mark entered will be inscribed in
the shape selected here.
3.3 Connecting Marks
(selecting mark connection
line)
Marks can be connected with lines to denote
net location, fishing spot, etc. Three types of
connection lines are available and the "•" set-
ting disables connection of lines.
1) Press [MENU ESC] and [2]
2) Press ▲ or ▼ to select Mark Line.
3) Press t or s to select mark line de-
sired.
4) Press the [NU/CU ENT] key.
5) Press the [MENU ESC] key.
Are you sure to erase ?
ENT: Yes MENU: No
TRACK/MARK SETUP
Track Rec
Mark Shape
Mark Line
Event Mark
Time
(01'00)
Dist
(00.50nm)
: Select
ENT: Enter MENU: Escape