Furuno GP-36 - Manual (Page 44)

7-4
Figure 7-9 STATION (USER) display
6. Select “NEW?” and press the [ENT] key.
The following display appears.
Figure 7-10 NEW USER
CHANNEL display
7. Press the [ENT] key, enter frequency of
the station, and press the [ENT] key.
8. Press the [ENT] key, enter baud rate of
the station, and press the [ENT] key.
9. Press the [ENT] key, enter latitude of the
station, and press the [ENT] key.
10 Press the [ENT] key, enter longitude of
the station, and press the [ENT] key.
11.Select “SAVE?” and press the [ENT] key.
12.Press the [MENU] key twice to finish.
Editing user channels
1. Press the [MENU] key twice to open the
menu.
2. Select DGPS and press the [ENT] key.
3. Select STATION and press the [ENT]
key.
4. Select LIST and press the [ENT] key.
5. Select USER and press the [ENT] key.
6. Select a station from the list and press
the [ENT] key. The display looks some-
thing like the one below.
Figure 7-11 Display for editing
user channels
7. Select item, press the [ENT] key, edit
data, and press the [ENT] key.
8. Select “SAVE?” and press the [ENT] key.
9. Press the [MENU] key twice to finish.
Erasing all user channels
1. Press the [MENU] key twice to open the
menu.
2. Select DGPS and press the [ENT] key.
3. Select STATION and press the [ENT]
key.
4. Select LIST and press the [ENT] key.
5. Select USER and press the [ENT] key.
6. Select CLR? and press the [ENT] key.
The following message appears.