Furuno GP-36 - Manual (Page 51)

7-11
Note 2: DPGS position fix is not available
when uploading or downloading data.
Downloading data to a PC
1. Press the [MENU] key once or twice to
open the menu, select I/O SETUP and
press the [ENT] key.
Figure 7-22 I/O SETUP menu
2. Select SAVE WP/RTE
→
PC?.
3. Press the [ENT] key.
Figure 7-23 SAVE WP/RTE display
4. Press the [ENT] key.
Figure 7-24 SAVING START? prompt
5. Setup the computer to receive data.
6. Press the [ENT] key.
Figure 7-25 Displays when
downloading data
7. Press any key to escape.
Uploading data from a PC
Note that all waypoint and route data stored
in GP-36/GP-31 will be deleted when data
is uploaded.
1. Press the [MENU] key once or twice to
open the menu, select I/O SETUP and
press the [ENT] key.
2. Select LOAD WP/RTE
←
PC?.
3. Press the [ENT] key.
Figure 7-26 LOAD WP/RTE display
4. Press the [ENT] key.
Figure 7-27 LOADING START? prompt
5. Set up the computer to output data.