Frymaster 14 Series - Manual (Page 30)

4-12
4.10 M2007 Common Tasks
Covered in this section are common tasks used in stores:
1. Escaping out of a menu or sub-menu.
2. Adding new product items.
3. Storing menu items in product buttons.
4. Draining, disposing and refilling the vats.
4.10.1 Escape Menu Items
To escape or back out of MENUS and SUB-MENUS, press the (2)
button (Figure 26).
Figure 26
4.10.2 Adding New Product Items to the Menu
This function is used to add additional products to the computer menu.
To add a new product to the menu:
1. With the computer OFF, enter Level 1 programming mode by
pressing the TEMP and INFO buttons simultaneously (see Figure
27) until
LEVEL 1 is displayed.
Figure 27
The computer displays ENTER Code and sounds an audible alert.
2. Enter 1234 (see Figure 28). 1 2 3 4
(1234)
Figure 28
The computer displays level 1 program for three seconds.
The computer then displays Product selection.
3. With Product selection displayed, press the (1
yes) button to select a menu item (see Figure 29).
Figure 29
Computer displays PRODUCT Selection for three seconds then displays select
product.
4. With Select Product displayed on the left and Fr Fries
displayed on the right use the
4
button (see Figure 30) to advance
through menu items until the right display reads the menu item to be
modified or a numbered spot is displayed ( ex.
PROD 13).
Figure 30